Silicone Epoxy (LG-710) is a new generation pool and pond paint that offers an unusual combination of performance properties in a high solid nontoxic formula. Flexibility, color retention, UV resistance and long-term submergibility are all remarkable making it an excellent choice for fish ponds, swimming pools, water slides and water features. The cured finish is exceptionally smooth which is perfect for water slides. The easy to use, no-mix formula is acceptable for use on virtually all swimming pool, pond and water feature surfaces. You can expect seven or more years of maintenance free service when you choose Silicone-Epoxy.

Provides superior adhesion, higher flexibility (conforms to ASTM-6221 and ASTM 6222) and UV resistance than competing pool and pond paints. Offers good resistance to pool chemicals and saltwater. Acceptable for use on concrete, Gunnite, Marcite, plaster, fiberglass, aluminum, tile, steel and masonry. Prevents seepage of water, resists chalking, chipping and peeling, alkali (from concrete or plaster), growth of algae and molds and minimizes collection of iron and dirt. May be brushed, rolled or sprayed, cleans up easily. Brush: recommend natural bristle brushes. Roller: For smooth surfaces use 3/8” non shedding roller cover; higher nap cover for textured surfaces. Spray: Recommend small-medium size tip. Covers 400 square feet per gallon when brushed or rolled on smooth surfaces. Dry to the touch in 2-4 hours. May be recoated, wet sanded and buffed. See label and application directions for further information. Available in 100 colors, gloss and satin, special order colors available on request for an additional $10.00 per gallon. 7 Year Warranty.

Recommendations: Apply two or more coats to achieve a minimum DFT of 4 mils. Test porous surfaces for hydrostatic pressure utilizing Vapor Guage Test Kit. See Application Instructions for further details. Use LG-104 Seal-It! Deep Penetrating Sealer where there is more than 4 LBS hydrostatic pressure.

Cleaner: Recommend LG-695 Etching Cleaner for concrete, tile, all metals and masonry.

Primer: Clear may be applied without primer. Porous surfaces use LG-6390 or LG-715 Primers. Non-porous surfaces use LG-664 Etching Primer.

Accelerator/Hardener: Recommend LG-160 Accelerator/Hardener to speed dry and cure time, increase hardness and chemical resistance.

Thinner: See (LG-605 Thinner) do not substitute.

Slip Resistance: Add 16 oz TS-630 Pro-Tex /gal or 1 package Tread-Tex /gal.

Clean up: Clean with acetone or LG-101 Thinner. Refer to Application Instructions Sheet, Product Data Sheet, label directions or contact us for additional information.

Documentation: Application Instructions, Product Data Sheet, MSDS