TS-695 Etching Cleaner
www.lifeguardpaint.com
Etching Cleaner is easier to use than muriatic acid and safe in the
drains and flowerbeds. A low odor formula that is a must-have for all
pool refinishing projects. It cleans, removes lime, rust and
contaminates from all surfaces. It is effective, fast acting and easy to
use. It
is acceptable for use on
concrete, Gunnite, Marcite, tile, fiberglass,
metal, aluminum and masonry. Oil, grease, dirt, and chemical stains
disappear quickly and completely. Also attacks rust, corrosion and
oxidation in grooves and crevices as well as on smooth surfaces.
.
An excellent pre-treatment cleaning solution intended to be used on
surfaces prior to application of swimming pool paint by removing
unwanted contaminants and neutralizing lime, concrete by-products and
contaminates on the surface which may seriously impair the coatings’
ability to form a satisfactory bond. Tested and approved by aluminum
manufacturers for use on aluminum surfaces. Removes easily and safely
exhaust and chemical stains, oxides and corrosion from aluminum, zinc
and cadmium plate as well as iron and steel. An advanced phosphoric acid
based pretreatment solution. Available in quart, gallon and five gallon
containers.
Directions for use:
Best when used full strength. Always apply to pre-wetted surfaces. Do
not use in full hot direct sunlight above 80F. Pour or mop on surface,
once applied allow to stand for 10 -15 minutes. Rinse carefully and
allow to dry thoroughly before applying paint or primer. Some very clean
surfaces may allow dilution with water on a 1:1 basis.