TS-664 Etching Primer
www.lifeguardpaint.com
Etching
Primer makes coating hard to adhere to surfaces including Gunnite,
plaster, plastic, aluminum, fiberglass, glazed tile and vinyl look easy.
Ease of use, adhesion, build and flexibility are excellent. Unique
because of its versatility and the extraordinarily tenacious chemical
bond it creates on a wide variety of surfaces. It allows you to prime
then paint virtually any surface associated with swimming pools or
ponds. Very well like because of its effectiveness, ease of use,
sandability and protective qualities it provides.
A hi-performance Phenolic Modified Alkyd Primer specially formulated for
use with hard to prime surfaces such as Gunnite,
concrete,
glazed tile, aluminum,
fiberglass and plastic. It creates an unequaled etching bond to whatever
it is applied to without mixing multiple components. It will not lift to
hot solvents, is fast drying and high in solid content. It is a
corrosion resistant primer that inhibits rust penetrates cracks and
withstands saltwater. It protects corners and edges and resists exposure
to the damaging effects of weather.
Intended for use as a primer coat for properly prepared surfaces. Use on
any interior or exterior surface. Excellent for use in swimming
pool applications. Color: White or Red Oxide. Finish is low sheen.
Stats:
Coverage is approximately 300 square feet per gallon, depending on the
texture and porosity of the surface. Dries to the touch in 30 minutes.
Recoat in 2-4 hours. Apply by brush, roller or spray.
Recommended preparation:
For best results follow application instructions sheet. Remove old
swimming pool paints, loose scale, grease, oil and contaminates. Sand,
grind, bead blast or power-wash prior to the application of any cleaner
or primer. Etch Concrete, gunnite, tile and aluminum with TS-695 Etching
Cleaner. For added slip resistance in traffic areas add Gaco-Grip, Tred-Tex
or aluminum oxide to the primer coat for a non skid surface.
Thin & clean up:
Use only with factory recommended thinner, TS-605 Thinner. Clean all
equipment thoroughly with TS-605 Thinner.